How To Reinstall Impress Caput On Hp Officejet Pro 8610 Printer? [Solution]
Sometimes printer users got a work on the Print Head, especially users of HP Officejet Pro 8610 printer. For this case, the users of this printer require to know 'How to Reinstall Print Head on HP Officejet Pro 8610 Printer'. In this article, nosotros volition order to you lot a solution to laid this problem.
If you lot got work on your Print Head, Reinstall Print Head Only perform this procedure, if a missing or defective Print Header message has been emitted in addition to the printer was outset turned Off, in addition to then turned ON to endeavour to resolve the message. If the message persists, endeavour this procedure:
To reinstall the impress head, follow this steps:
(1) Make certain the HP Officejet Pro 8610 printer is turned ON.
(2) Open the access door of the impress cartridge.
(3) Lift the latch on the impress carriage.
(4) Remove the impress caput yesteryear lifting it slightly upward in addition to out of the printer.
(5) Make certain the latch is lifted, in addition to and then reinsert the impress head.
(6) Carefully lower the latch.
[NOTE]: Make certain the latch is downwards earlier reinserting the ink cartridges. If this latch is left inwards the raised position, the ink cartridges may non live on properly positioned, causing problems during printing. For proper ink cartridge installation, the latch must rest inwards the downwards position
(7) Close the access door to the ink cartridges.
If your Print Head work has non been resolved, endeavour doing it in ane lawsuit again in addition to in ane lawsuit again according to the higher upward procedure.